If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

When you are preparing a CD/DVD project for duplication or replication, it’s important that you prepare the master disc correctly to eliminate any problems or delays. Your master disc should be an exact copy of what you want produced. Make sure you have tested the copy you’re going to send on several different players to assure they play as expected. Sometimes older burning software is used and the master will not play across a variety of players due to the software so make sure your disc plays in systems other than the one it was burned on before you send it in. Below are the basic rules you need to follow to assure your project goes smoothly:

There are many brands of media to choose from. With so much low quality cheap media on the market, it’s easy to try and save a few cents and use the cheap stuff. Remember, the master is what your copies are going to be made from and low quality media might not produce the best result. It’s best to spend a few extra cents and buy higher quality media like Mitsui, Maxell, or Taiyo Yuden. The company performing the work for you should be able to recommend a quality brand for you to use for the master.

After you have completed the master, it’s important that you clearly mark it with either a label or marker that is approved for writing on the surface of a disc. Duplication houses work with many different customers that send master on a daily basis. It’s important your master is clearly marked to avoid a delay or worse some sort of mix up with another project.

Testing is the most important step in the whole process. Once you have completed your master, you need to test in several different target media players to assure it behaves as you want it to. Listen for the sound quality, playback speed, etc.. Whatever you see and hear on the master, is going to be what you see and hear on the copies. Some burners produce masters that will only play well on the system they were produced on. This is why it’s important to assure your master plays across various systems. Duplication houses don’t play them on players; instead they verify the information with bit to bit verification against the master. So, if your master has playability issues, so will your copies.

If you follow these very basic steps, you should not have a problem with getting your project completed. Remember the vendor performing the service is there to help you and if you have any questions preparing the master, ask them for direction. They would much prefer to help you do it correctly so that there will be no delays in completing the project. Their goal is to make you a happy customer so you use them again and tell all your friends and business acquaintances to use them when they need that type of work done.

Tags: Business

Popularity: 5% [?]

Share This